Home » Tables » Wesbeam E Joist Span Tables

Wesbeam E Joist Span Tables

e – joist combines the latest engineered wood technology with LVL to create a floor joist that’s lightweight, straight and strong and available in lengths up 13.


Manufactured from LVL and oriented strand board (OSB), e – joist has a similar strength as a solid LVL beam of the same size but uses much less wood, making it lighter and easier to handle.

Wesbeam e -beam Span Tables Roof Members Rafters 4 Roof Beams 6 Strutting Beams 8 Strutting-Counter Beams 10.

Floor Joists Floor Joists – Supporting Floor Loads Only 22.

member listed in the Span Tables is taken from Table 2.

5 in AS1720.

1 # 1997.

Wesbeam is an Australian-owned manufacturer of quality Laminated Veneer Lumber (LVL) products for the tall timber building system and residential construction industry.

Our growing range of LVL products are engineered to span further, carry greater loads and withstand the #, Yes – use the e -splay tables on pages 5 and 6 for single splay or pages 7 and 8 for double splay of e -beam 2 span table brochure.

General: How to handle and store you Wesbeam Laminated Veneer Lumber products.

Wesbeam #s LVL is a lightweight, high-strength building material engineered from renewable and sustainably sourced Western Australian timbers.

Our range of LVL products are designed to span further and weigh less to optimise efficiency in design and construction.

e -beam is designed and made to exceed the requirements of all relevant Australian standards.

e -beam LVL has many advantages over traditional building products, including its uniformity of engineering properties.

Available in lengths up to 13.

2m and in a range of thicknesses including 35mm, 45mm, 63mm and 75mm with depths from 90mm to 450mm.

Stress grades and timber sizes combine to determine the spanning ability of load carrying members.

Span tables allow users to choose an appropriate size and stress grade to achieve spanning needs.

For simple construction, such as domestic construction, this can be determined from span table supplements in AS1684.

2 and AS1684.


Products include e -beam, e -beam+ [F17], e – joist , e -bearer+ joist , e -splay, e -beam2, e -purlin, e -strut, e -form, e -plank and e -garage.

Wesbeam also has its own software design program, which helps you make the most of the engineered properties and cost benefits of using Wesbeam LVL products.

at www.


com Use of e – joist Data The Tables and other technical data provided in this publication are only applicable to e – joist manufactured by Wesbeam.

This data should not be used for look-alike or substitute products.

Use of the e – joist data for look-alike or substitute products can result in unsafe or unsatisfactory performance.

he use of multiple sections where called for in the Span Tables is permitted using T vertically nail laminated LVL.

Multiple LVL members are to be fixed in accordance with Cl 2.

3 of AS1684.

2 # 2010.

Characteristic Design Values The characteristic Design Values for Wesbeam e -beam LVL are available on request from Wesbeam #s Technical Department.

wesbeam e joist span tables