Home » Belts » Seat Belts Nzta

Seat Belts Nzta

Seat belts save lives.

They support you if you’re in a crash or when a vehicle stops suddenly.

The force on seat belts can be as much as 20 times your weight – this is how hard you’d hit the inside of your vehicle without restraint.

, Objective of the rule.

Land Transport Rule: Seatbelts and Seatbelt Anchorages 2002 is one of a series of rules that sets safety requirements and standards for systems and components in vehicles operating in New Zealand.

This rule states in which seating positions seatbelts must be fitted in vehicles, as well as the type of seatbelt that must be fitted.

, 19/10/2018 Most lap belts do not have these features and are not being including in this safety alert.

#Safety is top our priority – we are urging people that if BVL/Changzhou BWD seatbelts are fitted in their vehicle#s driver seat , that they do not use their vehicle until replacements are fitted.

, A particularly hard to reach bunch of lads continue to not wear their seatbelt in a moving vehicle.

They know about them but see them as an optional extra; they#re not something #proper# men need to use.

The aim of this campaign is to make the seatbelt a worthwhile item for them to wear.

We want to bring #risk# to the front of their mind and show them why they should always.

, Seatbelt advertising.

A particularly hard to reach bunch of lads continue to not wear their seatbelt in a moving vehicle.

They know about them but see them as an optional extra; they#re not something #proper# men need to use.

, 30/11/2018 “Critical defects” have been found in replacement seatbelts and the NZ Transport Agency ( NZTA ) is urging any vehicle owners who have retrofitted belts to check the labels.

, Federal Motor Vehicle Safety Standard No.

210, Seat Belt Assembly Anchorages # Passenger Cars, Multipurpose Passenger Vehicles, Trucks and Buses.

Australian Design Rule 5, Anchorages for Seat Belts and Child Restraints.

unless the seatbelt is a specialist type approved by the NZTA.

Seats with variable orientation.

21.

If a seat in a motor.

, 1 Must have been verified for compliance with that standard by an organisation specified by the NZTA in the New Zealand Gazette.

2 Must be integrated with the rear seat of a motor vehicle.

See Figure 7-5-1 for the standard markings that may assist in determining compliance of seatbelts with approved standards.

, 1 A sideways-facing seating position in a vehicle first registered in New Zealand before 1 October 2002 may be fitted with a seatbelt of any type, and in a vehicle first registered from 1 October 2002 may be fitted with a seat belt that is a lapbelt only.

2 Front type R1 seatbelts may remain fitted if they were fitted as OE and have a declaration issued by a certifier, or a plate affixed to.

, A vehicle manufactured before 1 October 2003 may be fitted with lap belts in any seating position if the vehicle has a permanent structure that ends less than 500mm above the top of the uncompressed seat cushion (measured from a point 150mm forward of the lowest part of the back cushion), and OE upper seatbelt anchorages are not fitted.

seat belts nzta