Home » Tables » Hilti Hit Hy 200 Load Tables

Hilti Hit Hy 200 Load Tables

The load values contained in this section are Hilti Simplified Design Tables.

The load tables in this section were developed.

Table 3 – HIT – HY 200 design strength with concrete/pullout failure for HIT -Z(-R) rods in uncracked concrete 1,2,3,4,5,6,7,8,10 Nominal anchor diameter in.

07/12/2016 DOCUMENT DESCRIPTION UPDATED HY 200 Product Load Tables for HIT – HY 200 Hybrid Adhesive Anchoring System 11/2/16 RE 500 V3 Product Load Tables for HIT -RE 500 V3 Epoxy Adhesive Anchoring System 11/2/16 HY 70 Product Load Tables for HIT – HY 70 Hybrid Adhesive for Masonry Construction 10/19/16 RE 100 Product Load Tables for HIT -RE 100 Epoxy Adhesive #, HIT – HY 200 now adds ICC-ES approval for grout filled CMU and twenty percent higher published loads on average in cracked concrete, giving you even more security in seismic anchoring applications.

HIT – HY 200 with SafeSet# Technology eliminates the need for manual hole cleaning, which increases productivity all while using a system that meets.

Hilti offers the highest performing, most reliable anchoring solutions in the industry.

HIT – HY 200 now adds ICC-ES approval for grout filled CMU and twenty percent higher published loads on average in cracked concrete, giving you even more security in seismic anchoring applications.

HIT – HY 270 Technical Data for Masonry Construction Page # 2 # April 2018 Table 1 # Hilti HIT – HY 270 allowable adhesive bond tension loads for threaded rods and reinforcing bars in the face of grout-filled concrete masonry walls1,2,3,4,5,6,7,8 Nominal anchor diameter c in.

Rebar size Effective embedment in.

(mm)11 cr Tension, Hilti HIT – HY 200 -R V3 500 ml foil pack (also available as 330 ml foil pack).

– Maximum load performance in cracked concrete and uncracked concrete – High corrosion / corrosion.

as specified in the table – One anchor material, as specified in the tables – Concrete C 20/25, f ck,cube, Hilti HIT – HY 200 with HIT -Z 10 / 2012 490 Hilti HIT – HY 200 with HIT -Z.

cracked concrete with no load reductions – Two mortar ( Hilti HIT – HY 200 -A and Hilti HIT – HY 200 -R) versions.

as specified in the table – One anchor material, as specified in the tables – Concrete C 20/25, f.

ck,cube, ( Hilti HIT – HY 200 -R) Fire test report IBMB, Brunswick 3501/676/13 / 2012-08-03 a) All data given in this section according ETA-12/0084, issue 2013-06-20.

Service temperature range Hilti HIT – HY 200 injection mortar may be applied in the temperature ranges given below.

An elevated base material temperature, Hilti Epoxy Anchors HIT – HY 200R and HIT – HY 200 -A are solid choices for practically any anchoring application.

They handle multiple challenges#including cracked concrete and seismic conditions#and satisfy industry approvals.

To learn more, check out the Adhesive Anchor Selector Chart.

With Hilti #s SafeSet technology, HIT – HY 270 can be used for CMU, hollow CMU and clay bricks with holes to reliably and safely set anchors.

It is also an OSHA 1926.

1153 Table 1 compliant solution for drilling.

HIT – HY 270 includes new base materials and applications with approvals, as well as improved spacing and edge distances.

Select from several combination packages for both HIT – HY 270 and.

hilti hit hy 200 load tables