Home » Belts » Corexy Belt Tensioner

Corexy Belt Tensioner

03/08/2018 In corexy mechanisms, when you apply force to one belt (move one of the motors in the Y direction, for example) to change its tension , you also change the tension on the other belt.

When you assemble the mechanism and adjust tension on the first belt , the #, 21/04/2019 V-King CoreXY – Individual XY Belt Tension – Duration: 8:22.

PRO 3D 1,966 views.


The Tronxy D01 is a Solid CoreXY , Linear Rail 3D Printer.

BUT – Duration: 8:28.

Be sure to tension this belt system with the same amount of force.

You can misalign the extruder carriage gantry and your coreXY system will not be square.

To check that your system is properly square, align the extruder gantry with the front frame of the Promega as shown in the image below.

Promega CoreXY Belt Tensioner by supinemonkey is licensed under the Creative Commons – Attribution license.

Liked By View All Give a Shout Out If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag Makes Thing Statistics 2022 Views 434 Downloads.

ein Riemenspanner fr alle CoreXY Drucker mit V-Profilen und 6er Nut a belt tensioner for all CoreXY printers with V-profiles and 6-slot Update v.

2 redesigned pusher left & right inserted BOM & Hex Screw STL B O M Belt Tensioner Core XY mounting plate 3x M4 Hammer Nut Slot 6 -Type B 3x M4 DIN 125 Washer 3x M4x12 Button Head Hex Drive Screw ISO7380 2x M3x25 DIN 933 Hex Head Screws #, If the belt tension in the coreXY system became too loose the belts can become unseated from their bearings.

The coreXY belt system might seem complicated, but it is relatively simple.

If your Promega system.

Broken CoreXY.

Two Loops.

The coreXY belt system is made up from two loops, an upper loop and a bottom loop.

You can see this in the.

15 rows CoreXY : Waterjet Aluminum Revision 1.

Belt tension is applied by sliding stepper motor #, The CoreXY and the H-bot are a Cartesian arrangements — they makes it easy to move the head in straight lines along axis 90 degrees from the other axis.

There is a change in the belt pattern from the H-bot arrangement to the CoreXY arrangement.

The belt loads on the carriage of

corexy belt tensioner