Home » Drums » Brother Hl 3170cdw Drum Stop

Brother Hl 3170cdw Drum Stop

(Click here to see the details of how to replace the drum unit.

We recommend a genuine Brother drum unit be installed at this time.

After replacement, reset the drum counter by following the instructions included with the new drum unit.

Unpack the new drum unit.

Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

If you install the cartridge correctly, the green lock lever on the drum unit will lift automatically.

Clean the corona wire inside the drum unit by gently sliding the green tab from left to #, Drum Stop.

Home; Others; MFC-9340CDW; FAQs & Troubleshooting.

the drum unit with a new one.

(Click here to see the details of how to replace the drum unit.

) We recommend a genuine Brother drum unit be installed at this time.

DCP-L3551CDW, DCP-L8400CDN, FAX-2840, FAX-2940, HL-2280DW, HL-3140CW, HL-3150CDN, HL-3170CDW , HL-3180CDW, HL.

If you already replaced the drum unit and the message continues to appear on the display, follow steps below: To reset the drum counter when ‘Replace Drum ‘ or ‘ Drum Stop ‘ is currently appearing on the LCD: 1.

Press the UP OR DOWN ARROW key to select Machine Info.

Press OK.

2.

Press the UP OR DOWN ARROW key to select Reset Parts Life.

Press OK.

The Brother machine will display a ‘Replace Drum ‘ or ‘ Drum Stop ‘ message when the machine has printed approximately 15,000 pages.

The drums should be replaced as a set in order to maintain print quality.

Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

02/11/2017 How to repair, reset and disassembly DRUM BROTHER DR241CL for use in laser printers and multifunction HL-3140CW / HL-3150CDW / HL-3170CDW / DCP-9020CDW / MFC.

brother hl 3170cdw drum stop